Technical
Technical Help
The COP of any Air to Water Heat Pump is based on two variables. 1. Outdoor air temperature - the lower the temperature the less amount of energy is in ...
Thu, 23 Apr, 2020 at 12:20 AM
The limitation of a heat pump is limited to the properties of the refrigerant being used. All Freon R410a heat pumps including both Air to Water such as th...
Wed, 29 Jan, 2020 at 4:35 PM
If you are installing an Arctic Heat Pump in a heavy snow belt region of the country it is best to mount the heat pump higher on the wall. Our normal groun...
Sat, 25 Jan, 2020 at 1:22 PM
You can use an external thermostat for managing a cooling call. This is done by using CN35 terminal which is Remote ACC ON/OFF. When close the cooling w...
Wed, 13 May, 2020 at 10:59 PM
Our EVI Arctic Heat Pumps have the ability to operate down to an outdoor temperature of -30C (-22F).
Wed, 6 May, 2020 at 8:38 PM
Yes, certainly our heat pump systems have the ability to heat your domestic hot water. We can include a 200’ copper hot water coil inside of our Eco Ultra s...
Wed, 6 May, 2020 at 8:39 PM
When operating an Arctic Heat Pump in temperatures exceeding the -30C (-22F) operation threshold, our systems are designed to automatically call for a backu...
Wed, 6 May, 2020 at 8:41 PM
Our Arctic Heat Pump can produce cold hydronic fluid in the summertime, and there are multiple ways you could distribute that cold air throughout house. The...
Wed, 6 May, 2020 at 8:42 PM
We have 3 EVI model Heat pumps, our 020A, 040A, and 060A. They each have a gross weight of 240 lbs, 374 lbs, and 396 lbs respectfully.
Wed, 6 May, 2020 at 8:47 PM
All three of our EVI Arctic Heat Pumps require 240V power. Our 020A, 040A, and 060A have a max amp draw of 14.8, 24.1, and 28.6 respectfully. These units re...
Wed, 6 May, 2020 at 8:51 PM